Cottage Quilting Ltd.
01-12591 SPEED CONTROL FOR JANOME 6500, 6600, JUKI TL 98E QUANTUM 9910,9940, ELNA 7300,7200
01-12589 SPEED CONTROL FOR MEGA QUILTER/GRAND QUILTER/JANOME 1600/HD9, ELNA 7100
01-12588 SPEED CONTROL FOR JUKI 2000QI/2010Q/TL2200QVP MINI/TL 18 QVP
01-12592 SPEED CONTROL FOR BABYLOCK QCP, JANE, BROTHER 1500S
01-13255 SPEED CONTROL FOR JUKI 98Q, QE, Jazz II
01-13256 SPEED CONTROL FOR JANOME HORIZON
01-12590 SPEED CONTROL FOR BERNINA 150, 165, 185, ARTISTA: 820, 830, AURORA: 430,440,QE, 450, ACTIVA:145, 240, 720, 730, 7&8, VIRTUOSA: 153, 155
These are special ordered in based on your model and it is important to note that if your model is not listed within this group we strongly recommend moving to the sure stitch elite as we cannot guarantee it will work otherwise and that a store credit only will be offered as an exchange.
Push button Start Stop, Single Stitch, Dial Speed Control Knob, 1 Pin Plug In for Foot Control Port on Juki, Brother, Babylock, Bernina, Elna, Janome, Pfaff, Singer Computerized Sewing and Quilting Machines.
- Speed dial that allows you to set your machine to desired stitch speed.
- On/Off Button to start and stop your machine
- Pulse Button--machine runs until you release it, or touch and release for a single stitch
- Velcro Straps for easy attachment to your frame.
• Easy to use knob controls stitching speed
The Grace Speed Control puts the power of your foot pedal at your fingertips.
- Note: This should be added to domestic machines. This controls the constant stitch speed, it is NOT a stitch regulator like the SureStitch.
- Grace Speed Control Start Stop & Speed Control is not the same as Grace Sure Stitch length regulator that increases motor speed to match faster movement of machine over fabric on quilt frames, or faster movement of fabric under needle if sewing on a table.
* 1 Prong if for electronic foot control models that have a single prong foot control receptacle on the machine. 3 Prong version is for Janome made straight stitch only quilting machines (1600P, Babylock, Viking and Pfaff) that have a 3 prong receptacle on the machine.
Note: Two Velcro straps are included to mount the Grace Speed Control through the 4 slots shown to any handle on front and back of machine or frame. Longer cords are available for remote or out of range positioning.
The Grace Speed Control is a universal foot pedal replacement. It works with many machines on the market. The easily accessible setting adjustment allows you to have compatibility with multiple machines. With Grace Speed Control, when you switch machines it will too! The Grace Speed Control is compatible with many DC-powered machines that have a single prong foot pedal plug-in. D.C.-powered machines usually have a separate foot pedal plug-in and a power cord plug in.
Note: AC-powered machines combine the two cords into one plug in receptable - these types of machines are generally NOT compatible with the Grace Speed Control
- Speed dial that allows you to set your machine to desired stitch speed.
- On/Off Button to start and stop your machine
- Pulse Button (machine runs until you release it, or touch and release for a single stitch)
- Velcro Straps for easy attachment on either side of your frame.
- Compact Ergonomic Design.
The Speed Control Box comes with a 3.5mm Male Mono Plug connector and a 5.5mm Female Power Plug. Machines with other connectors are not currently compatible.
The Grace Speed Control puts the power of your foot pedal at your fingertips.
Note: This should be added to domestic machines. This controls the constant stitch speed, it is NOT a stitch regulator like the SureStitch
