Cutter Blade		Washing Condition				Storage Condition
Blade	Blade:45˚		Detergent Standard(Household)		Do not twist strongly		Cool and dry place without direct Sunlight
			Don’t use Steam Avoid direct contact		60℃ or below

Application instructions (home iron)

• Cut material –  mirror your design!
• Weed excess material
• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
• Peel carrier Warm or cold

Application Instructions (heat press)

• Cut material – mirror your design
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 305°F/150°C
• Use medium pressure for 8-12 seconds
• Peel carrier Warm or Cold