DnD Miniature Cavern tiles! Also available painted upon request.
🪓Looking to start or grow your collection of tabletop Terrain with a huge set of amazing cavern tiles from Fat Dragon Games?
Look no further than this amazing set of 61 tiles. This will WOW your table!
2 - 2x3 Large Cavern Entrances
2 - 2x2 Small Cavern Entrances
8 - 2x2 Floor Tiles
2 - 2x2 Cavern Stairs
4 - 2x2 Corner Tiles with Pillar
2 - 2x2 4 Pillar Floor Tiles
2 - 2x2 3 Pillar Floor Tiles
2 - 2x2 2 Pillar Floor Tiles
2 - 2x2 1 Pillar Floor Tiles
4 - 2x2 Wall with 1 Pillar Tiles
2 - 2x2 Wall with 2 Pillar Tiles
4 - 2x2 Narrow Cavern Ending tiles
4 - 2x2 Narrow Hallway Tiles
4 - 2x2 Corner Tiles
8 - 2x2 Wall Tiles
4 - 2x2 Wavy Wall Tiles
3 - Freestanding Stalactites
1 - 2x2 Giant Pillar Tile
1 - 2x2 Freestanding Stalactite Floor Tile
Using a system of internal 3x4mm cylinder magnets, these will seamlessly connect together while allowing room for clips to still be used. This lets you use them for multiple level dungeons or buildings while still having the magnetic connection available!
These ship with enough DragonBite clips to attach all tiles together, though they work perfectly fine freestanding without clipping, I usually do this when using them while DMing, they're very sturdy on their own.
Unpainted - Bare PLA, usually in grey or possibly in another color upon request. Separate pieces won't be glued together on some parts such as doors, so you have the opportunity to paint and glue when ready. Painting available upon request!
🔍The Scale of these tiles is 1", based around the common sized of miniatures used in games such as D&D and Pathfinder.
🔒These tiles will work with all other Fat Dragon Games (www.fatdragongames.com) dungeon tiles and connectors. Multiple basic connectors will be provided with a purchase of multiple tiles. These provide a strong connection between tiles, allowing them to be shifted around and moved as one piece.
🐱🏍If you're looking for other pre-painted styles of tile such as rough stone or cave styles please check back regularly as we are constantly updating the shop and adding new sets!
🖨These are printed using PLA (polylactic acid) which is a renewable resource created from corn and sugar cane. They are printed by layering the plastic over and over, at heights of 0.2mm per layer. This will provide a lot of detail, though on close inspection some layer lines will be visible. A light sanding and priming/painting usually hides them very well.
🖨3D printing can be a lengthy process, so although we do try and keep some in stock, some parts will still need to be printed and this can take some time depending on order size. We will notify you if there is any delay in shipping.
STL Files designed by Tom Tullis of Fat Dragon Games
Original .stl files of this model can be purchased from www.fatdragongames.com.
